Johansson 9742 SKY Q SCR 5 Inputs- 8 Outputs OLT Unicable Multiswitch

£89.95

14 in stock

SKU: J-9742S Category:

Description

Johansson 9742 SKY Q SCR 5 Inputs- 8 Outputs OLT Unicable Multiswitch

4 satellite + 1 terrestrial inputs, 4 satellite + 1 terrestrial trunk outputs, 8 outputs with 3 user bands each: 1280 / 1382 / 1484 MHz.
The device has 4 satellite inputs and an LTE-protected passive terrestrial input. The switch can distribute signals for 8 (legacy mode) up to 24 (SCR mode) receivers. By cascading several units, more receivers can be connected. Thanks to legacy support, the multiswitch can be used even if no SCR set-top boxes are installed yet.
The wide range of satellite input levels (60 to 91 dBμV) ensures the multiswitch will work even under extreme conditions.

  • 4 satellite inputs and LTE (4G) protected passive terrestrial input
  • wide range of satellite input levels: 60 to 91 dBμV
  • high output power (AGC controlled)
  • supports auto-tuning of set-top boxes
  • low trunk-loss (ideal for cascading several multiswitches)
  • multistandard support: EN50494/Legacy (backward compatible with old set-top boxes)
  • DC input for LNB powering (ref 9933 / 9933UK)

Details:

  • Model No: 9742
  • Brand: Johansson

What’s included:

  • 1 x Johansson 9742 SCR 5 Inputs- 8 Outputs OLT Unicable Multiswitch
  •  1 x Manual ( EN )

 

Technical Overview 9742:
Inputs   :
1 x Terrestrial
4 x Satellite
Outputs  :  8 outputs (up to 24 tuners)

Frequency  MHz  :

Ter.: 5-790 (LTE protected)
SAT: 950-2150

SCR channels  MHz : 1280/1382/1484
Supported standards :  EN50494 / BSkyB / Legacy
Max. input level SAT :   dBµV  91

Max. output level SAT  : dBµV  =
SCR mode:   90
Legacy mode: 80

Trunk loss  dB :
Ter.: 5*
SAT: 2,5
Return loss in/out:  dB  > 10
Tap loss (Terrestrial):  dB  typ. 24
LNB remote current:  mA 500
STB current :  mA 180
Operating temperature: °C -20 to +50
Dimensions : mm  202 x 158 x 50

Important note:    When you set up this Multiswitch ensure you complete the Set Up procedure. Once channels have been set in the SCR mode on the set-top box, ensure you switch off the decoder at the mains, leave it for 5 minutes, plug it back into the mains, and leave for a further 5 minutes.
This item is recommended to be installed mainly by a Professional Engineer.