Description
Genuine SKY / Freesat MK3 Single Output Satellite LNB for Older Sky Dishes
This is the original Sky single LNB as fitted to MK3 and earlier Sky Zone 1 and Zone 2 dishes. If your satellite dish has a completely rectangular LNB support arm then you will need this LNB.
This SKY LNB is supplied complete with the spacer and retaining locking pin and it will fit either the older narrow type or the more rectangular type boom.
The original Sky dish types have rectangular LNB support arms that measurer either 30mm x 20mm for the MK3 version or 25mm x 12mm for the older Grundig and Cambridge dishes.
The newer MK4 version has a rectangular support arm that has only 3 sides and the LNB is not suitable for this dish.
This universal single LNB is the type used by Sky in their installations. It is designed specifically for the Sky dishes as fitted by Sky. You can also use this LNB for any other satellite services that require a universal LNB, not just Sky.
The brand supplied may vary and will be either WNC, Zinwell, Raven, MTI or Thomson. Picture will vary from brand to brand but the fittings are idental and will all fit the Sky MK3 dishes.
Features:
- Genuine Sky Single LNB For Sly Dishes
- Comes Complete With Spacer with Retaining locking pin
- Suitable For MK3 Dishes With Complete Rectangular LNB Arm, 30mm x 20mm or 25mm x 12mm
- Not Suitable For Use With The Newer MK4 Dish Version
What’s Included:
- 1x Genuine MK3 SKY Single LNB
- Spacer with Retaining locking pin
The replacement of this LNB is very simple. No special tools or knowledge are required. You need to undo the F connector from the old LNB, this twists off like a screw. You may need to remove the old rubber boot or cut off any rubber sealing tape that has been fitted on the connector. The next stage is to remove the plastic pin from the boom arm and the LNB will simply slide out.
The new LNB will slide in place of the old one. The collar supplied should be fitted over the protruding arm of the LNB. Once fitted the LNB is held in place by fitting the new plastic pin through the hole in the boom arm.
(RUBBER BOOT IS NOT INCLUDED)
