Johansson 9740 SCR 5 Inputs- 4 Outputs OLT Unicable Multiswitch

£179.95

24 in stock

SKU: J-9740S Category:

Description

Johansson 9740 SCR 5 Inputs- 4 Outputs OLT Unicable Multiswitch

4 satellite + 1 terrestrial inputs, 4 satellite + 1 terrestrial trunk outputs, 4 outputs with 3 User Bands each: 1280/1382/1484 MHz
The device has 4 satellite inputs and an LTE-protected passive terrestrial input. The switch can distribute signals for 4 (legacy mode) up to 12 (SCR mode) receivers. By cascading several units, more receivers can be connected. Thanks to the legacy support, the multiswitch can be used even if no SCR set-top boxes are installed yet.
The wide range of satellite input levels (60 to 91 dBμV) ensures the multiswitch will work even under extreme conditions.

  • 4 satellite inputs and LTE (4G) protected passive terrestrial input
  • wide range of satellite input levels: 60 to 91 dBμV
  • high output power (AGC controlled)
  • supports auto-tuning of set-top boxes
  • low trunk-loss (ideal for cascading several multiswitches)
  • multistandard support: EN50494/BSkyB/Legacy (backwards compatible with old set-top boxes)
  • DC input for LNB powering (ref 9933 / 9933UK)


Details:

  • Model No: 9740
  • Brand: Johansson

What’s included:

  • 1 x Johansson 9740 SCR 5 Inputs- 4 Outputs OLT Unicable Multiswitch
  •  1 x Manual ( EN )

 

Technical Overview:
Inputs   :
1 x Terrestrial
4 x Satellite
Outputs  :  4 outputs (up to 12 tuners)

Frequency  MHz  :

Ter.: 5-790 (LTE protected)
SAT: 950-2150

SCR channels  MHz : 1280/1382/1484
Supported standards :  EN50494 / BSkyB / Legacy
Max. input level SAT :   dBµV  91

Max. output level SAT :  dBµV
SCR mode:   90
Legacy mode: 80

Trunk loss  dB :
Ter.: 3*
SAT: 2
Return loss in/out:  dB  > 10
Tap loss (Terrestrial):  dB  typ. 24
LNB remote current:  mA 500
STB current :  mA 180
Operating temperature: °C -20 to +50
Dimensions : mm  122 x 158 x 50

Important note:    When you set up this Multiswitch ensure you complete the Set Up procedure. Once channels  11 and 14 OR 14 and 11 have been set in the SCR mode on the set-top box, ensure you switch off the decoder at the mains, leave it for 5 minutes, plug it back into the mains, and leave for a further 5 minutes .

Powered by Designastore